Installation Method of Pioneer Hoist Door Motor of Shanshui Industry Door
Before mountainous industry door motor is installed, please check the operation of the door body, so that the door body can run smoothly without jamming, and the balance system is good, so that the door can be easily operated by hand.
The motor is equipped with shaft drive type and chain drive type. Our company configures single accessories as shaft drive type. Users can install and debug sprockets and chains by using chain-driven installation mode, which makes it more necessary for them to choose the appropriate sprockets and chains and installation mode.
Axle-driven installation method is simple and convenient, that is, the lifting door motor is directly installed on the door axle, as long as the door frame side has about 250mm space to install the motor.
The specific steps are as follows:
1. Choose the suitable installation position of "Pioneer Industrial Door Motor", draw the line, and drill the expansion screw hole for the installation board on the wall according to the location of the line.
2. Insert a fixed sleeve on the door axle first, and then put the main frame sleeve on the entry axle. Fix the machine tightly on the installation board with M10 bolt (the installation board is available on both sides of the machine)
3. Adjust the position, pay attention to make the manual chain on the machine perpendicular to the ground (horizontal and vertical machine), fix the installation plate on the wall of the drilled hole with the rated expansion path, and tighten four M10 screws.
4. Pull the red handle to the manual working position, and gently pull the manual chain to align the keyway on the door axle with the keyway on the main engine, insert the 6*80 flat key, then insert the second fixed sleeve into the door axle, and make the left and right fixed sleeves close to the end face of the machine axle, and tighten the stop screw to prevent the machine and the flat key from falling out. Now outside.
This is the way to install "Shanshui Industrial Door Motor". If you need to purchase Shanshui Lifting Door Motor and Pioneer Industrial Door Motor, we can provide a variety of models, such as GK60S/GK40/GK90S/GK50/70.