欢乐生肖注册

公司允许:
斲丧最好的欢乐生肖注册欢乐生肖注册,做最好的欢乐生肖注册控制箱
天下办事热线:讨论欢乐生肖注册  
400-6080-090   
  • 讨论德律风:13940183063
  •   
  • 办事德律风:400-6080-090
  •   
  • 讨论人:于经理
  • 您如今的位置是   欢乐生肖注册>>最新资讯 >> 「KST欢乐生肖注册控制器」kst电控箱控制面板说明

      「KST欢乐生肖注册控制器」kst电控箱控制面板说明

      作者:kst欢乐生肖注册电控箱   时间:2019/8/22 9:31:38
    •  

      「KST欢乐生肖注册控制器」kst电控箱控制面板说明


      "KST Fast Gate Controller" Description of Control Panel of KST Electronic Control Box

       




      5位LED数码管表现区:可区分表现编码器以后脉冲数,频率、转速、电压、电流、拦阻代码、结果码等。


      The display area of 5-bit LED digital tube can display the current pulse number, frequency, speed, voltage, current, fault code and function code of the encoder respectively.


      外形指示灯:用于指示变频器以后外形。方向、启停、学习、手动、自动


      欢乐生肖注册 State indicator: Used to indicate the current state of the converter. Direction, Start and Stop, Learning, Manual, Automation

       

      KST欢乐生肖注册电控箱




      菜单选择切换键:编程外形与监视外形的切换键,举行参数表现与编程菜单的切换,在编程菜单外形下应用该键则前去到前一级菜单。


      Menu selection switch key: switch key between programming state and monitoring state, switch between parameter display and programming menu, operate the key in programming menu state and return to the previous menu.


      结果选择/存储键:在编程外形下进入下一级菜单。在三级菜单外形下完成参数的存储应用。


      Function Selection/Storage Key: Enter the next level menu in the programming state. In the three-level menu state, the storage operation of parameters is completed.


      加1/下行键:设定参数值的递增;Cr028设为1时,此键可控制门机下行


      Add 1/Up Key: Set the increment of parameter value; When Cr028 is set to 1, this key can control the door crane upstream.


      脉冲表现情势/学习键:在频率表近况态下,按此键可进入脉冲表现情势,可监控以后位置改造,长按此键,5位数值闪烁,进入门机总高学习外形;


      Pulse Display Mode/Learning Key: In the state of frequency display, press this key to enter the Pulse Display Mode, which can monitor the current position change, press this key for a long time, and flicker with 5-digit value to enter the total high learning state of the portal crane.


      移位键:可以革新设置数据的修正位,移到以后位时,此位数码管闪烁,此时按上下键可以对以后位数据修正


      Shift key: You can change the modification bit of the set data. When you move to the current bit, the digital tube flickers. At this time, you can modify the current bit data by pressing the upper and lower keys.


      减1/下行键:设定参数值递减。Cr028设为1时,此键可控制门机下行,此时相称于REV下行端子结果


      Decrease 1/Downlink key: Set parameter values to decreases. When Cr028 is set to 1, this key can control the downlink of door crane, which is equivalent to REV downlink terminal function.


      抑制下令/拦阻复位键:变频器运转时用于停机应用;相称于急停X3端子结果,运转时按下此键,欢乐生肖注册顿时停机、停机指示灯闪烁,表如今急停外形,再按一下此键,停机指示灯灭,表现参与急停外形


      Stop command/fault reset key: the frequency converter is used for shutdown operation when it is running; it is equivalent to the function of emergency stop X3 terminal. When it is running, press this key, the motor stops immediately and the stop indicator flashes, indicating that it is in the state of emergency stop. Press this key again, the stop indicator lights go out, indicating that it is out of the state of emergency stop.


      复位/清零键:变频器拦阻复位,在学习门高外形时,长按此键,可清零以后编码器脉冲数,用于学习门机下限位零点位置,相称于X0端子清零结果;


      Reset/reset key: Frequency converter fault reset, long press this key in the high state of learning gate, can reset the current number of encoder pulses, used to learn the lower limit zero position of the door machine, equivalent to the X0 terminal reset function;


      手动/自动情势切换:Cr029设为1时,此按键结果相称于X4手自动转换开关结果


      Manual/automatic mode switching: When Cr029 is set to 1, this button function is equivalent to X4 manual automatic switching switch function.


      KST欢乐生肖注册控制器」可为您提供220V/380V电控箱,功率有0.75/1.5/2.2/3.8等功率,欢迎来电订购,大批现货,低价批发,天下配奉上门。


      "KST Fast Gate Controller" can provide 220V/380V electronic control box with equal power of 0.75/1.5/2.2/3.8. Welcome to order, large number of spot, low-cost wholesale, door-to-door distribution throughout the country.